Emec KMS MF - 10. PUMPS FUNCTIONS SUMMARY; Function Overview and Working Modes

21
10. PUMP’S FUNCTIONS SUMMARY
Pump’s functions summary
During pump’s working mode is it possible to see furthers working information.
Press more times the “UP” key to cycle through following information:
key
key
key
Working Mode
Power Supply Voltage
key
key
divide
000.10
key
cc/st
0.20
External signal value (in Volt and mA
working mode)
or actual system flow (Multiply,
Divide and PPM working mode).
This item is not present in Constant
working mode.
key
STROKES
100 SPM
MODE
divide
SUPPLY
220 VAC
DOSING
0.000 lph
input
196 lph
Liters/Hour or Gallons/ Hour
Dosage