Emec MAX5 - GPRS Modem Configuration; GPRS SIM PIN Entry; GPRS ERMES Server Enable; GPRS APN Setup

32
GPRS
MAX5 may be remotely operated using an embedded standard GPRS modem. In order to activate this service please
ensure that the following steps are correctly completed:
- Make certain the antenna location is not shielded by metal objects or near sources of electrical ‘noise’.
- Make certain the distance from the antenna and the “MAX5” or its accessories is of a minimum of 1meter (3.28ft).
- Do not route the cable where it could be pinched in doors, windows etc.
- Ensure that SIM into “MAX5” modem is correctly inserted, activated and within operator range.
IF REQUIRED ENTER APN MANUALLY
SIM PIN CODE (4 DIGITS): enter pin code if “error pin” message appears on main screen. PIN can’t be edited.
ERMES-SERVER: enable or disable ERMES communication through SIM CARD*
APN SIM SERVICE PROVIDER: enter SIM INTERNET PROVIDER ACCESS manually if required.
USERNAME / PASSWORD FOR SIM INTERNET ACCESS: enter these information only if required.
Please locate CODE NUMBER in SERVICE MENU for using to gain acess to ERMES WEB SERVICES
*WARNING: THIS FUNCTION COULD NOT BE FREE OF CHARGE. DEPENDING ON YOUR OPERATOR CONTRACT IT
COULD GENERATE PAYING DATA TRAFFIC !
EMAIL
MAX5 may send alarm email messages if properly congured through ETHERNET connection. In order to activate this
option enter the following information:
g. 28
Access point name (APN) identies an IP packet data network (PDN), that a mobile data user wants to communicate with. In addition to identifying a PDN, an
APN may also be used to dene the type of service, (eg connection to wireless application protocol (WAP) server, multimedia messaging service (MMS)), that
is provided by the PDN. APN is used in 3GPP data access networks, eg general packet radio service (GPRS), evolved packet core (EPC).
g. 29
1st email address (to destination)
2nd email address (to destination)