FCC ID: LW2RM2510
IC ID: 2731A-RM2510
Ordinary location certification (CSA)
As standard, the transmitter has been examined and tested to determine that the design
meets basic electrical, mechanical, and fire protection requirements by CSA, a nationally
recognized testing laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
CE mark
The 2.4 GHz version of the device has been tested and complies with all relevant directives
required for CE marking.
Country Restriction
Bulgaria General authorization required for outdoor use and public service.
Italy If used outside of own premises, general authorization is required.
Norway May be restricted in the geographical area within a radius of 10 km from
the center of Ny-Alesund.
Romania Use on a secondary basis. Individual license is required.
Electromagnetic Compatibility (EMC) (2004/108/EC)
All Models: EN 61326-1, 61326-2-3: 2006
Canadian Standards Association (CSA)
CAN/CSA-C22.2 No. 61010-1-04 - Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use, Part 1: General Requirements
ISA S82.02.01 2nd (IEC 61010-1 Mod) - Safety Standards for Electrical and Electronic Test,
Measuring, Controlling and Related Equipment - General Requirements
UL 61010-1 2nd - Safety Requirements for Electrical Equipment for Measurements,
Control, and Laboratory Use, Part 1: General Requirements
Product certifications
126 MHM-97408, Rev 15
To Next Page
Loading...
Need help?
General
