Emerson CSI 9420 - Field Communicator Fast Key Sequences

2.2.1 Field Communicator fast key sequences
The following fast key sequences assume that you are using a Rev 4 DD. Press Send to save
the changes to the device.
CSI 9420 network configurationTable 2-7:
Key sequence Menu items
2, 2, 1
(Manual Setup)
Network ID
Broadcast Info
Join Device to Network
Configure Publishing
Configure Update Rate
Transmit Power Level
Default Burst Config
2, 1
(Guided Setup)
Configure Sensors
Configure Variable Mapping
Configure Units
Alert Limits
Sensor Power Enable
Join Device to Network
Configure Publishing
Configure Update Rate
CSI 9420 common fast key sequencesTable 2-8:
Function Key sequence Menu items
General settings 2, 2, 3 (Manual Setup)
LCD Mode
Power Source
Advanced Config
Units
Write Protect
MHM Access Control
Alert setup 2, 3
Overall Velocity
PeakVue
Bias
Ambient Temperature
Supply Voltage
Update rate
2, 1, 8 (Guided Setup)
2, 2, 1, 5 (Manual Setup)
Configure Update Rate
Publishing mode
2, 1, 7 (Guided Setup)
2, 2, 1, 4 (Manual Setup)
Configure Publishing
Write protect 2, 2, 3, 5 (Manual Setup) Write Protect
Configuration
32 MHM-97408, Rev 15