Need help?Do you have a question about the Emerson CSI 9420 and is the answer not in the manual?
General| Output | 4-20 mA, Modbus RTU |
|---|---|
| Power Supply | 12-30 VDC |
| Communication Protocol | Modbus RTU |
| Enclosure Rating | IP66 |
| Protection Rating | IP66 |
| Input Type | Vibration |
| Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
| Input Channels | 1 |
| Housing Material | Stainless steel |
Crucial safety warnings and precautions for handling and installation.
General description of the CSI 9420 transmitter and its features.
Steps and methods for configuring the CSI 9420 device.
Procedure for connecting to a wired HART interface for initial setup.
Steps to configure network credentials for wireless communication.
Detailed guide for configuring the transmitter using a Field Communicator.
Instructions for configuring the device via AMS Device Manager software.
How to configure the CSI 9420 using AMS Machinery Manager.
Procedures for powering the CSI 9420 transmitter using battery or external DC.
Information on sensor types, limits, handling, and mounting.
Tools and supplies needed for sensor installation and mounting.
Details on installing, enabling, and turning on the optional LCD.
Guidelines for properly grounding the transmitter for noise reduction.
Methods to check the operational status via LCD, Field Communicator, or gateway.
Procedures for handling, replacing, and shipping the power module.
Explanation of the Overall Velocity measurement for fault detection.
Description of PeakVue technology for detecting high-frequency phenomena.
Guidance on setting temperature alert thresholds.
Strategies to reduce electromagnetic and radio frequency interference.
Technical details on input, output, display, and transmit rate.
Information on electrical connections, construction materials, and enclosure ratings.
Details on temperature limits and electromagnetic compatibility.
Technical parameters for the wireless radio communication.
Diagrams showing physical dimensions of the transmitter.
Illustrations and specifications for sensor mounting procedures.
Details on telecommunications and FCC/IC approvals.
Information regarding certificates for operation in hazardous environments.
Screens displayed when the power module is first connected.
Displays showing the network status of the CSI 9420.
Screens indicating the operational state or errors of the device.
To Next Page
