Parts
September 2013
8-3
Kit Description Part Number
14* Spare Housing Assembly Kit,
[kit contains housing (key 1); drive screw, qty. 2 (key 11);
shield (key 20); and screen (key 271)]
Aluminum
DVC6010/DVC6020 GE18652X012
DVC6030 GE18653X012
Stainless Steel
DVC6010/DVC6020 GE18652X022
DVC6030 GE18653X022
15 DVC6020 Cam Adjustment Tool GE12742X012
16* Spare Shroud Kit GE29183X012
17 Travel Sensor with Feedback Arm Assembly
and PTFE Sleeve Kit
DVC6010 GG09947X012
DVC6015 GG09948X012
DVC6020 GG09949X012
DVC6025 GG09950X012
Remote Mount Kits
18 Remote Terminal Box Kit
Standard GE00418X012
19 Feedback Unit
DVC6015 49B7986X012
DVC6025 long arm 49B7987X012
DVC6025 Short Arm 49B7987X022
DVC6035 49B7988X012
DVC6035 (for GX actuator) 49B7988X022
20 Remote Mount Retrofit Kit
Note
This kit converts an existing DVC6000 in the remote
mounted version. Note that the DVC6030 cannot be
converted to the DVC6035.
DVC6010 to DVC6005/DVC6015 DVC6015RMTR
DVC6010 to DVC6005/DVC6035 DVC6035RMTR
DVC6020 to DVC6005/DVC6025 (short arm DVC6025RMSA
DVC6020 to DVC6005/DVC6025 (long arm) DVC6025RMLA
21 Feedback Unit Termination Strip Kit GE00419X012
22 Pipestand/Wall Mounting Kit GE00420X012
Severe Service Linkage Kits
Note
All metallic parts (except coil springs) in the corrosion
kit and parts that experience rubbing or wear in the
wear kit are coated with a proprietary tungsten carbon
coating.
23 Corrosion Kit
DVC6010 0.25 to 2 Inch travel GE22667X012
DVC6010 2 to 4 Inch travel GE22668X012
DVC6020 short arm GE22670X012
DVC6020 long arm GE22671X012
DVC6030 rotary GE22672X012
DVC6030 linear GE22673X012
24 Wear Kit
DVC6010 0.25 to 2 Inch travel GE22674X012
DVC6010 2 to 4 Inch travel GE22675X012
DVC6020 short arm GE22676X012
DVC6020 long arm GE22677X012
DVC6030 rotary GE22678X012
DVC6030 linear GE22679X012
Kit Description Part Number
25 Kit, Spring
DVC6010 0.25 to 2 inch travel [kit contains 10 bias
springs w/tungsten carbon coating] GE37413X012
DVC6010 2 to 4 inch travel, [kit contains 10 bias
springs w/tungsten carbon coating] GE37414X012
Parts List
Parts which do not show part numbers are not
orderable as individual parts. In most cases, they are
available in one of the parts kits listed under Parts
Kits.
Note
Parts with footnote numbers shown
are available in parts kits. Also see
footnote information at the bottom of
the page.
Key Description
Housing
DVC6010, DVC6020, DVC6030, DVC6005
(see figures 8-2, 8-3, 8-4, and 8-5)
1 Housing
(14)
11 Drive Screw
(14)
(2 req’d)
20 Shield
(14)
52 Vent, plastic
(2)
DVC6010, DVC6030, and DVC6005 only
74 Mounting Bracket
DVC6020 Std
(3)
or pipe−away
(7)
, and DVC6005
(22)
75* O−Ring
(7)
, DVC6020 only
245 Pipe Plug, pl stl
(7)
, DVC6020 Vent−away only
248 Screw, hex head
(22)
(4 req’d), (DVC6005 only)
249 Screw, hex head
(22)
(4 req’d), (DVC6005 only)
250 Spacer
(22)
(4 req’d), (DVC6005 only)
267 Standoff
(22)
(2 req’d), ( (DVC6005 only)
271 Screen
(14)
Common Parts
DVC6010, DVC6020, DVC6030, DVC6005
(see figures 8-2, 8-3, 8-4, and 8-5)
16* O−ring
(1)
(3 req’d)
29 Warning label, for use only with LCIE hazardous area
classifications
33 Mach Screw, pan hd, SST
(2)
(3 req’d)
38 Cap Screw, hex socket, SST
(2,13)
(3 req’d)
8
*Recommended spare
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the DVC6010 to DVC6020 Conversion Kit
7. Available in the Pipe−Away Bracket Kit
13. Available in the Spare Module Base Assembly Kit
14. Available in the Spare Housing Assembly Kit
22. Available in the Pipestand/Wall Mounting Kit
To Next Page
Loading...
Need help?
General
