Quick Start Guide
D103556X012
DVC6200 Digital Valve Controllers
August 2015
43
Hazardous Area Approvals and Special Instructions
for “Safe Use” and Installations in Hazardous Locations
Certain nameplates may carry more than one approval, and each approval may have unique installation/wiring
requirements and/or conditions of “safe use”. These special instructions for “safe use” are in addition to, and may
override, the standard installation procedures. Special instructions are listed by approval type.
Note
This information supplements the nameplate markings affixed to the product.
Always refer to the nameplate itself to identify the appropriate certification. Contact your Emerson Process Management sales
office for approval/certification information not listed here.
Approval information is for both aluminum and stainless steel constructions.
WARNING
Failure to follow these conditions of “safe use” could result in personal injury or property damage from fire or explosion, or
area re‐classification.
For CSA Approvals proceed to page 44
For FM Approvals proceed to page 51
For ATEX Approvals proceed to page 58
For IECEx Approvals proceed to page 65
SIS
To Next Page
Loading...
Need help?
General
