Need help?Do you have a question about the Emerson FXMP25 and is the answer not in the manual?
General| Model | FXMP25 |
|---|---|
| Input Voltage | 24 VDC |
| Type | Controller |
| Operating System | Real-time OS |
| Power Supply | 24V DC |
| Output Voltage | 24V DC |
Covers warnings, cautions, electrical safety, and personnel safety aspects.
Addresses electrical installation risks, stored charge, and environmental limits for safe operation.
Covers product ratings, nameplate details, features, and available options.
Guidelines for mechanical installation, competence, enclosure, and fire protection.
Details of electrical terminals, torque settings, and routine maintenance checks.
Procedures for electrical connections, safety risks, and isolation.
Grounding, AC supply, EMC, line reactors, cable and fuse ratings.
Navigating the keypad, display modes, resetting, and security.
Loading default values and saving parameters.
Explains parameter coding and the process for loading default values.
Details for important parameters like Autotune, OK Flux Level, and Motor Saturation.
Covers parameters for enabling field control, setting field mode, and economy levels.
Details on serial address, baud rate, software versions, and security codes.
Procedures for quick start commissioning in Standalone, Mentor MP, and Mentor II modes.
Covers ratings, derating for ambient temperature, and power dissipation.
Details AC supply requirements, types, and recommendations for line reactors.
Details temperature, humidity, storage, altitude, IP rating, vibration, and EMC compliance.
Explains trip indications, categories, and alarm indications with their diagnoses.
Status indications, trip history display, and behavior when the controller trips.
Information on UL recognition, conditions of acceptability, AC supply, and current ratings.
To Next Page