Emerson Hydrastep 2468 series - 3 C.3 Opto-Isolated Output Board Configuration

Opto-isolated Output Board Option Hydrastep 2468CB & 2468CD Manual
3c-6 24685034
3C.3 OPTO-ISOLATED OUTPUT BOARD CONFIGURATION
The 24680505 Opto-isolated Output Board has three configuration switches:
 SW6: Selects Electrode or Alarm state for Opto-output 1.
 SW1 - SW4: Selects individual electrode for opto-outputs I to 4.
 SW5: Selects Opto-outputs 1 - 4 to be energised when electrodes in
steam or in water.
Figure 3c.1 provides a view of the output board layout to highlight the positions of the various
configuration switches.
Figure 3c.1 - View of opto-isolated board showing switch positions and output pin details