Indicates the UPS is bypass mode.
Indicates the UPS is in ECO mode.
Indicates the UPS is in converter mode.
Indicates the UPS is charging battery.
Indicates the Battery capacity by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates the battery is fault.
Indicates low battery level and low battery voltage.
3-3. Audible Alarm
Beeping once every 2 minutes
Beeping once every 4 seconds
Beeping twice every second
Beeping once every second
Overload 3 times in 30 minutes
Cover of maintain switch is open
Parallel protection is activated
Inverter soft start failure
Inverter output short circuited
Battery SCR short circuited
Inverter relay short circuited
Parallel communication failure
Parallel output current unbalance
CPU communication failure
Battery or charger short circuited