20 Chapter 7 Operation And Display Panel
7.3.4 Main Menu Screen
Press any button in the default screen to enter the Main Menu screen, as shown in Figure 7-6.
1 STATUS
2 CONFIGURATION
3 CONTROL
4 LOG
5 ABOUT
Figure 7-6 Main Menu screen
To select a submenu, press the UP or DOWN button to move the cursor to the required item, and press the ENTER
button to enter its submenu or set its parameter.
STATUS screen
Select Main Menu -> 1 STATUS to enter the STATUS screen, displaying OUTPUT, LOAD, INPUT,PARALLEL,
BATTERY and TIME SINCE STARTUP, as shown in Figure 7-7.
VOLT : 230V
FREQ
: 50Hz
CURR
: 17.6A
POWER : 4000WH
OUTPUT
CAP : 90%
WATT
: 4000W
VA : 4000VA
LOAD
VOLT : 230V
FREQ
: 50HZ
CURR : 18.6A
POWER: 4000WH
INPUT
VOLT : 230V
FREQ
: 50HZ
CURR : 17.6A
PARALLEL
CAP : 90%
WATT
: 4000W
VA : 4000VA
PARALLEL
CAPACITY : 90%
RUNTIME : 100MINS
VOLTAGE : 148V
BATTERY
TIME SINCE STARTUP
05D 15H 30M
Figure 7-7 STATUS screen
CONFIGURATION screen
Select Main Menu -> 2 CONFIGURATION to enter the CONFIGURATION screen. This menu has five submenus, as
shown in Figure 7-8.
1 UPS
2 BATTERY
3 ECO
4 LCD
5 FACTORY DEFAULT
Figure 7-8 CONFIGURATION screen
In the CONFIGURATION screen, press the UP or DOWN button to move the cursor to the required item, and press
the ENTER button to enter its submenu or set its parameter.
1. UPS screen
Select Main Menu -> 2 CONFIGURATION -> 1 UPS to enter the UPS screen. This menu has seve n screens, as
shown in Figure 7-9.
Liebert GXT4 UPS 5000VA ~ 10000VA (230V) User Manual
To Next Page
Loading...
