Battery Installation
20
2.3.6 Moving the Battery Cabinets
Ensure that the weight is within the designated surface weight loading of any handling equipment.
See Table 8 for weight details.
Battery cabinets can be handled by means of a fork lift or similar equipment.
2.3.7 Cable Entry
Cables enter the battery cabinet from either the top or the bottom. Cable entry is made possible by
removing a blanking piece fitted at the bottom to reveal the cable entry hole.
!
WARNING
Ensure any lifting equipment used in moving the cabinet has sufficient lifting capacity.
NOTE
Care must be taken when maneuvering units fitted with batteries. Keep such moves to a
minimum.
When the equipment has been finally positioned ensure the adjustable feet are set so that the
battery cabinet will remain stationary and stable.
To Next Page
Loading...
