Emerson Liebert NX 400V - Figure 13 Senxa0 Nbcn4 Lcb.eps

Battery Installation
28
Figure 13 SENXA0NBCN4LCB.eps
W001 W001 W001 W001
W001 W001
W001 W001
W002
W002
W001 W001 W001 W001 W001
W001 W001 W001
W001 W001 W001 W001 W001
W001 W001 W001W001
W001 W001 W001W001
W001 W001 W001
W002
W002
W002
W002
W101
W102
W301
W302
BCB
Layer 1
Layer 2 Layer 3
SPACE
FRONT VIEW
Layer 4
TO UPS
BCB(125/200A)
Tray in Layer 1 Tray in Layer 2
Tray in Layer 4
Tray in Layer 3
TO UPS
3. Used for: NPX-100; UH12V140/A; UH12V200/A; UPS12-100; UPS12-140; UPS12-170; UPS12-200.
1. Please refer to BCB BOX user instructions for cable connection.
2. If no internal Control board used, temp. transport cables should be connected directly to external BCB control board. Meanwhile, the undervoltage release function for the internal BCB is not needed.
NOTE:
Temp. transport
Temp. channels reserved for Batt. cabinet Paralleling
OUT
P12
RED
GND
J1
BLUE
GREEN
RED
GREEN
BLUE
X105-2
BCB Control board
X102-4
X108-3
X103-2
X103-1
X108-1
X108-2
X104-2
X104-1
X103-3
X105-1
X104-3
X102-1
X102-2
X102-3
X100-4
X100-1
X100-3
X101-3
X100-2
X106-2
X106-1
X105-3
X106-3
X101-1
RED
BLACK
P
N.O.
N
V<