Battery Installation
36
Figure 21 SENXA0NBCWXX4LF_2x4
W102
W101
W006
W004
W005
W003
W004
W002
W001
W001
W001
W001
W001
W003
W004
W001
W001W001
W001
W003
W001
W001
W004
W001 W001
W001
W002
W004
W001
W002
W001
W001W001
W001
W003
W001W001
W001
W001
W001
W001
W001
W001
W001W001
W001
Tray master
Layer 1
Layer 3
Tray master
Tray master
Layer 4
Layer 2
Tray master
Tray slave
FRONT VIEW
Layer 1
Layer 2
Tray slave
SPACE
BCB
TO BCB BOX
TO BCB BOX
Tray in Layer 2
Tray master Tray slave
Tray in Layer 1
Tray master Tray slave
Tray in Layer 4
Tray master
SPACE
BCB
Tray slave
Tray in Layer 3
Tray master Tray slave
NOTES:
1. Please refer to BCB BOX user instructions for cable connection.
2. If no internal Control board used, temp. transport cables should be connected
directly to external BCB control board. Meanwhile, the undervoltage release
function for the internal BCB is not needed.
3. Used for: UH12V270/A,310/A,370/A,500/A; UPS12-270,310,370,475; A412/50,65 G6;
NPL65-12; NPL78-12; NPL100-12; 1290S.
GND
OUT
P12
Temp. transport
J1
BLUE
RED
GREEN
PP120/180-BLACK
(Anderson connector)
PP120/180-RED
(Anderson connector)
FWP-120A/200A
(Bussmann Fuses)
To Next Page
Loading...
