32 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
Figure 3-53 Restore System
Click the Reboot RDU-SIC G2 button to reboot the system.
Click the Restore System button to restore all the default settings.
Note
If you use the restore function, the RDU-SIC G2 may lose the original configuration solution. After the restore operation, make
sure to wait two minute for the RDU-SIC G2 conducting complete initializing work before re-accessing it through Web.
Site Setting
Click the Site Setting under the System Options menu, the page shown in Figure 3-54 pops up.
Figure 3-54 Site information setting
On the page shown in Figure 3-54, you can modify the site information of RDU-SIC G2, including Site Name, Site
Location and Site Description.
System Upgrade
Click the System Upgrade under the System Options menu, the page shown in Figure 3-55 pops up.
To Next Page
Loading...
