Options for HART variables
Standard HART process variablesTable 6-6:
Process variable Primary Varia-
ble (PV)
Secondary
Variable (SV)
Third Variable
(TV)
Fourth Varia-
ble (QV )
Gas Standard Volume Flow Rate ✓ ✓ ✓ ✓
Gas Standard Volume Inventory ✓
Gas Standard Volume Total ✓
Line (Gross) Volume Flow Rate ✓ ✓ ✓ ✓
Line (Gross) Volume Inventory ✓
Line (Gross) Volume Total ✓
Mass Flow Rate ✓ ✓ ✓ ✓
Mass Inventory ✓
Mass Total ✓
PVR-only HART process variablesTable 6-7:
Process variable Primary Varia-
ble (PV)
Secondary
Variable (SV)
Third Variable
(TV)
Fourth Varia-
ble (QV )
Corrected Oil Flow ✓ ✓ ✓
Corrected Oil Total ✓
Corrected Water Cut ✓
Corrected Water Flow ✓ ✓ ✓
Corrected Water Total ✓
Density of Oil @ Line Fixd degAPI ✓
Density of Oil @ Line Fixd SGU ✓
Oil Total @ Line ✓
Shrinkage Factor Corrected Oil Flow @ 60F ✓ ✓ ✓
Shrinkage Factor Corrected Oil Flow @ Line ✓ ✓ ✓
Shrinkage Factor Corrected Oil Total @ 60F ✓
Shrinkage Factor Corrected Oil Total @ Line ✓
Shrinkage Factor Corrected Total of Mix @ 60F ✓
Shrinkage Factor Corrected Volume Of Mix @ 60F ✓ ✓ ✓
Uncorrected Oil Flow ✓ ✓ ✓
Uncorrected Water Cut ✓
Uncorrected Water Flow ✓ ✓ ✓
Volume Flow of Mix at Line ✓ ✓ ✓
Volume Total Of Mix @ Line ✓
Integrate the meter with the control system
Configuration and Use Manual 83
To Next Page
Loading...
