Emerson MICROMOTION CNG050 - Mounting the Sensor; Sensor Mounting Guidelines

2 Mounting
2.1 Mount the sensor
Use your common practices to minimize torque and bending load on process connections.
Tip
To reduce the risk of condensation problems, do not orient transmitters or sensor junction boxes
with their conduit openings pointing upward.
CAUTION!
Do not lift the sensor by the electronics. Lifting the sensor by the electronics can damage the
device.
Mounting the sensorFigure 2-1:
Notes
• Do not use the sensor to support the piping.
• The sensor does not require external supports. The flanges will support the sensor in any
orientation.
Mounting
4 Micro Motion CNG050