12 PACSystems™ RSTi-EP EPSCPE115 Standalone CPU Quick Start Guide GFK-3039C
Instructions for Mounting the CPE115 on a DIN Rail
The CPE115 snaps easily onto the DIN rail, as shown in Figure 6. No additional tools
are required.
1) Incline the unit so that the upper hooks of the DIN rail adaptor engage with the
upper edge of the DIN rail.
2) Press on the lower part of the unit until it clicks into place. The click indicates that
the lower hooks of the DIN rail adaptor have engaged with the lower edge of the
DIN rail.
For technical assistance, please contact Technical Support. For phone numbers and
email addresses, refer to the back cover of this Guide.
Figure 6: Mounting of the CPE115 on DIN rail
To Next Page
Loading...
