Emerson PACSystems RX3i IC695CPE330 - Page 20

19 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K
To change the compatibility setting, perform the following operations:
1. Power off the CPE330 and remove any USB stick that might be attached to
its USB connector.
2. Place the CPE330’s RUN/STOP switch in the STOP position.
3. Hold down the RDSD UPLD button and turn power on to the CPE330.
Continue to depress the RDSD UPLD button until the CPE330 powers up
and displays one of the following patterns on the LEDs.
CPU Status Indicators
On
Blinking
Off
CPE330 LED
LED State
Ope rating State
CPU OK
On Amber
Normal mode. (Compatible with CPU320)
FORCE
On Amber
RUN
Off
RD S D
On Red
OUT EN
Off
SYS FLT
On Red
CPU OK
On Amber
CRU320 Compatibility mode.
FORCE
On Amber
RUN
On Red
RD S D
Off
OUT EN
Off
SYS FLT
On Red