7 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K
Light-Emitting Diode Indicators (LEDs)
Status Indicators
CPU has passed its power-up diagnostics and
is functioning properly. (After initialization
sequence is complete.)
Power is not applied, or CPU has a problem,
which may be indicated by blink pattern.
CPU in Stop-Halt state; possible watchdog
timer fault. If the programmer cannot
connect, cycle power with charged Energy
Pack attached and refer to fault tables.
CPU indicating CPU320/CRU320
compatibility setting
Refer to the section, Compatibility with
CPU320/CRU320/CPU315 for more
information.
CPU is updating an internal programmable
hardware device.