Quick Panel Operator User Manual Section 4
GFK-2847AA Jan 2023
Pre-installation Checks 52
4.6 Shutdown
There are no specific dangers associated with a power failure or other
unplanned shutdown of the QuickPanel
+
unit. In general, programs are
retained in flash memory and user data can be retained in BBSRAM.
Some operating system settings are retained only with user intervention.
Perform the following procedure to properly shut down the QuickPanel
+
unit.
To shut down the QuickPanel
+
unit
1.
Quit any programs that are running and wait for all file
operations to complete.
2.
If you have not changed operating system settings (for example,
brightness or touchscreen sensitivity), or do not want to save the
changes, remove ac power from the dc supply.
3.
Run the Backup Utility to save changes to operating system
settings. When the Backup window displays Completed
Successfully, remove power from the dc power supply connected
to the QuickPanel
+
unit.
To Next Page
Loading...
Need help?
General
