Quick Panel Operator User Manual Section 6
GFK-2847AA Jan 2023
Operation 82
Figure 84: Touchscreen Sensor Calibration Switch
6.
Replace the battery cover.
6.2 Keyboard Configuration
The QuickPanel
+
Operator Interface can be configured to use either or
both a hardware keyboard and a software emulation keyboard as
operator data input devices. Typically, an optional external hardware
keyboard is used when in development mode, while the included Soft
Input Panel (SIP) is more applicable in an operational environment.
6.2.1 External Keyboard (Optional)
Any USB-compatible keyboard may be used as an input device for the
unit. The USB driver for the keyboard is included with the operating
system and no configuration is required. To use an external keyboard,
connect the keyboard to the unit using the USB cable.
6.2.2 Soft Input Panel
The Soft Input Panel (SIP) is a touchscreen keyboard that may be used in
place of a standard hardware keyboard. An icon in the system tray
enables the user to view or hide the SIP.
To show or hide the SIP:
•
from the system tray located on the taskbar, tap the icon and select
Hide Input Panel.
Note: When visible, the SIP can be moved around the screen by dragging the title bar to reveal parts of
the screen that would be obstructed from view by the SIP.
To Next Page
Loading...
Need help?
General
