Table 6-1: Traditional Interface Fast Keys (continued)
Function Fast Key sequence
Output Trim 1,2,3,2
Percent Range 1,1,2
Poll Address 1,4,3,3,1
✓ Range Values 1,3,3
Rerange 1,2,3,1
Scaled D/A Trim (4–20 mA 1,2,3,2,2
Self Test (Transmitter) 1,2,1,1
Sensor Info 1,4,4,2
Sensor Trim (Full Trim) 1,2,3,3
Sensor Trim Points 1,2,3,3,5
Status 1,2,1,2
✓ Tag 1,3,1
Transmitter Security (Write
Protect)
1,3,4,4
✓ Units (Process Variable) 1,3,2
Upper Range Value 5,2
Upper Sensor Trim 1,2,3,3,3
Zero Trim 1,2,3,3,1
Note
A check (✓) indicates the basic configuration parameters. At
minimum, these parameters should be verified as part of the
configuration and startup procedure.
Table 6-2: Device Dashboard Fast Keys
Function Fast Key sequence
Field Revision Rev 3 Rev 5 Rev 7
HART Revision HART 5 HART 5 HART 7
✓ Alarm and Saturation
Levels
N/A 2,2,2,5,7 2,2,2,5,7
✓ Damping 2,2,1,2 2,2,1,1,5 2,2,1,1,5
✓ Range Values 2,2,2 2,2,2 2,2,2
✓ Tag 2,2,6,1,1 2,2,7,1,1 2,2,7,1,1
May 2019 Quick Start Guide
Quick Start Guide 15
To Next Page
Loading...
