Emerson Rosemount 5301 - Overfill Protection Approval

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
38
National Supervision and Inspection Center
for Explosion Protection and Safety of
Instrumentation (NEPSI) Approvals
SPECIAL CONDITIONS FOR SAFE USE (X)
Refer to Certificates:
GYJ081080X for Ex ia ll C T4 and GYJ081130X for Ex iad ll C T4.
E3
(1)
Flameproof:
HART model:
Ex iad IIC T4 (-40 °C<T
a
<+70 °C)
F
OUNDATION fieldbus model:
Ex iad IIC T4 (-40 °C<T
a
<+60 °C)
I3
(1)
Intrinsically Safe:
HART model:
Ex ia IIC T4 (-50 °C<T
a
<+70 °C)
4-20 mA / HART model: U
i
=30 V, I
i
=130 mA, P
i
=1.0 W,
C
i
=7.25 nF, L
i
=108 H
F
OUNDATION fieldbus model:
Ex ia IIC T4 (-50 °C<Ta< +60 °C)
U
i
=30 V, I
i
=300 mA, P
i
=1.5 W, C
i
0 nF, L
i
0 H
IC
(1)
FOUNDATION fieldbus FISCO model:
Ex ia IIC T4 (-50 °C<Ta< +60 °C)
U
i
=17.5 V, I
i
=380 mA, P
i
=5.32 W, C
i
0 nF, L
i
~0 H
NCC/INMETRO Approvals
SPECIAL CONDITIONS FOR SAFE USE (X)
Refer to Certificate:
4205/07X
E2 Flameproof:
BR-Ex d/ia IIC T4 -40 °CT
a
+70 °C
(2)
Gb/Ga
Approval valid for HART and F
OUNDATION fieldbus options.
I2, IB Intrinsically Safe:
BR-Ex ia IIC T4 -40 °CT
a
+70 °C
(2)
Ga
Approval valid for HART and F
OUNDATION fieldbus options.
Overfill Protection
Cert no: Z-65.16-476
U1 TÜV-tested and approved for overfill protection according to
the German WHG regulations
Approval valid for HART option.
Technology Institution of Industrial Safety
(TIIS) Approval
E4
(1)
Flameproof:
Transmitter: Ex d [ia] IIC T4
Probe: Ex ia IIC T4
Installation Drawing: 05300-00548.
Approval valid for HART and F
OUNDATION fieldbus options.
For detailed information, refer to the Rosemount 5300 Series
Reference Manual (Document No. 00809-0100-4530).
(1) Ordering Information Code for Product Certificates, see page 8 and page 13.
(2) +60 °C with F
OUNDATION fieldbus.