Quick Start Guide
19
August 2015
6.3 Connecting sensor to transmitter
Integral mount transmitters
Integral mount transmitters ordered with a sensor will be shipped assembled and
wired at the factory using an interconnecting cable. (See Figure 16). Use only the
socket module or IMS cable provided by Emerson™ Process Management.
For replacement transmitters, use the existing interconnecting cable from the
original assembly. Replacement cables are available.
Figure 16. Interconnecting Cables
Remote mount transmitters
Cables kits are available as individual component cables or as a combination
coil/electrode cable. Remote cables can be ordered direct from Rosemount using
the kit numbers shown in Table 10. Equivalent Alpha cable part numbers are also
provided as an alternative. To order cable, specify length as quantity desired.
Equal length of component cables is required.
Example: 25 feet = Qty (25) 08732-0065-0001
Socket Module
08732-CSKT-0001
IMS Cable
08732-0179-0003
To Next Page
Loading...
