Installation, Operation and Maintenance Manual
VA-DC-000-1952 Rev. 0
April 2021
20
Section 6: Maintenance
Maintenance
6.4 Recommended Annual Inspection
It is recommended the following components and features of the ECAT to be evaluated at least
once a year.
• Check hydraulic uid levels
• Check the pressure gauges
• Check bolts and ttings for tightness
• Check for external oil leaks
• Check the pneumatic ttings with a leak detection product such as Snoop liquid leak
detector from Swagelok or comparable.
• Check handpump operation functions properly
• If/When possible, perform a function test (See Section 4.6 for instructions on how to
perform a function test)
• Check accumulator and thermal volume controller function
• Check the breather on the hydraulic reservoir
• Check the return lter, if included
Qualied service personnel are available upon request. Please feel free to contact:
EMERSON AUTOMATION SOLUTIONS
ACTUATION TECHNOLOGIES
Address: 2500 PARK AVENUE WEST
ONTARIO, OH 44906
Telephone: (419) 529-4311
Fax: (419) 529-3688
To Next Page
Loading...
