Page: 13
SDU AC-A Series
A272-290 Rev. 5 07/2018
10.0 Software and Interface
Power Monitoring Software (UPSMON SOFTWARE)
The CD that comes with the UPS contains the UPSMON monitoring/diagnostic software. Install the UPSMON
software on your computer. Connect the UPS to your computer via the 2.0 Standard Type A-B USB cable
provided.
Figure 8: Connecting UPS to Computer
With the UPSMON software, users can perform monitoring functions and an orderly shutdown of protected
equipment in the event of power failure. UPSMON displays diagnostic information such as: voltage, frequency
andbatterylevels.ItalsoallowscongurationoftheUPSfeatures
Additional details available by selecting the “Help and Support” button of the control panel, as shown in
Figure 9.
Figure 9: UPSMON Control Panel, Monitor System