EasyManua.ls Logo

Emerson SolaHD SDU 500A - Specifications

Emerson SolaHD SDU 500A
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page: 5
SDU AC-A Series
A272-290 Rev. 5 07/2018
4.0 Specifications
Description
Catalog Number
SDU 500A SDU 850A SDU 500A-5 SDU 850A-5
INPUT
Capacity VA/Watts 500/300 850/510 500/300 850/510
Voltage Vac 120 V + 10%, -20% 230 V +/ -15%
Frequency 50 or 60 Hz, +/ -10% (auto-sensing)
Harmonic Distortion THD:42.1%;maximumsingleharmonicdistortionof:25.6%
OUTPUT (Back-Up Mode)
Voltage Vac
Simulated sine wave
120 V +/-5% 230 V +/-5%
Frequency 50 or 60 Hz, +/-0.5% auto-sensing
Transfer Time Typical <8 ms
PROTECTION
Unit Input (internal) 10A 5A
Overload Protection UPSshutdownifoverloadexceeds105%ofnominalat20s,120%at10s,130%at3s;auto-recovery
Short Circuit UPS shutdown, auto-recovery
BATTERY
Type Sealed, maintenance-free, lead acid batteries
Typical Recharge
Time
8 hours
Back-Up Time
(at full load)
4 min. 2 min. 4 min. 2 min.
ALARM
ON Battery Slow beeping every 4 seconds
Battery Low Rapid beeping every second
Overload Continuous beeping sound
ENVIRONMENT
Ambient Operation 0–95% humidity, non-condensing. 50 °C up to 6,600 ft. (2000m)
Audible Noise <40 dBA (1 m from surface)
Vibration
Operating - IEC60068-2-6, Sine Wave: 10Hz to 500Hz @19.6m/S²,
displacement of 0.35mm, 60 min per axis for all X, Y, Z direction.
Non-operating-IEC60068-2-6,Random:5hzto500Hz(2.09Grms);20minperaxisforallX,Y,Z
Shock
Operating - IEC60068-2-27, Half Sine Wave: 10G for a duration of 11ms, shock for 1 direction (X axis)
Non-operating - IEC60068-2-27, Half Sine Wave : 30G for duration of 11ms, 3 shocks for all 3 axes
WEIGHT & DIMENSIONS
Net Weight, lb. (kg) 10.6 (4.8) 11.5 (5.2) 10.6 (4.8) 11.5 (5.2)
H x W x D, in. (mm) 4.87 x 11.1 x 4.81 (123.7 x 281.9 x 122.3)
CERTIFICATIONS
Safety
: UL 1778, 5th Ed./CSA 107.3. UPS evaluated for use in UL 508/CSA 107.1 industrial applications
overvoltage category 3, pollution degree 3 with no output derating
: ISA 12.12.01/CSA 213 Class I, Div 2, Groups A, B, C, D, T3
CE;LowVoltageDirective-EN62040-1
EMC FCCPart15,SubpartB;EN62040-2;EN55032;EN55024-ClassA

Related product manuals