Unidrive M702 / HS72 Control Getting Started Guide 43
Issue Number: 2
Safety information Introduction Control connections Getting started
Basic parameters
(Menu 0)
Running the motor
Further information
6.2.6 Use of the motor database for a Leroy Somer LSRPM motor for use in
RFC-S Sensorless mode.
Select 'Motor Setup' from the 'Dashboard'.
On the 'Motor Setup' screen, select 'Choose a motor'.
Select the required motor database:
Select the required motor from the list and click 'OK'.
Unidrive M702_HS72 Control GSG Iss2.book Page 43 Friday, December 12, 2014 1:05 PM
To Next Page
Loading...
