Emerson Wireless 1410 Gateway - Page 41

Figure 5-6: EtherNet/IP Communications Page
Table 5-3: System Settings → Protocols → Ethernet/IP
Terms Description
Assembly Object Type EtherNet/IP use Static assembly object.
EtherNet/IP TCP Port The TCP Port used to access EtherNet/IP TCP data directly from the
Gateway.
EtherNet/IP UDP Ports The UDP Ports used to access EtherNet/IP UDP data directly from the
Gateway.
Incorporate value’s
associated status as error?
If the HART variable status indicates a critical failure or if there is a loss
of communications, it will be reported through the EtherNet/IP
member.
Value reported for error
(floating point)
Chooses what value is reported if the value’s associated status
indicates a critical failure. Only used if the Gateway is using float
representation
Reference Manual Operation and Maintenance
00809-0200-4410 September 2020
Emerson.com/Rosemount 41