EasyManuals Logo

Emerson Wireless 1410 Gateway User Manual

Emerson Wireless 1410 Gateway
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Special Conditions for Safe Use(X)
1. The equipment must be installed in an area of not more than Pollution Degree 2 as
defined in IEC 60664-1, and in an enclosure that provides a degree of protection of
at least IP54 and meets the relevant requirements of EN 60079-0 and EN 60079-15.
2. External connections to the equipment must not be inserted or removed unless
either the area in which the equipment is installed is known to be non-hazardous, or
the circuits connected have been de-energised.
3. The equipment is not capable of withstanding the 500 V electrical strength test as
defined in clause 6.5.1 of EN 60079-15: 2010. This must be taken into account
during installation.
4. When fitted, the surface resistivity of the remote antenna is greater than 1 GΩ. To
avoid electrostatic charge build up, it must not be rubbed with a dry cloth or
cleaned with solvents.
B.5.4
International
N7 IECEx Type n
Certificate
IECEx BAS 14.0067X
Standards
IEC 60079-0: 2011, IEC 60079-15: 2010
Markings
Ex nA IIC T4 Gc, T4(-40 °C ≤ T
a
≤ +75 °C), V
MAX
= 30 Vdc
Special Conditions for Safe Use(X)
1. The equipment must be installed in an area of not more than Pollution Degree 2 as
defined in IEC 60664-1, and in an enclosure that provides a degree of protection of
at least IP54 and meets the relevant requirements of EN 60079-0 and EN 60079-15.
2. External connections to the equipment must not be inserted or removed unless
either the area in which the equipment is installed is known to be nonhazardous, or
the circuits connected have been de-energised.
3. The equipment is not capable of withstanding the 500 V electrical strength test as
defined in clause 6.5.1 of EN 60059-15: 2010. This must be taken into account
during installation.
4. When fitted, the surface resistivity of the remote antenna is greater than 1 GΩ. To
avoid electrostatic charge build-up, it must not be rubbed with a dry cloth or
cleaned with solvents.
Note
Currently not available for Emerson 1410D option.
Reference Manual Product Certifications
00809-0200-4410 September 2020
Emerson.com/Rosemount 67

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Emerson Wireless 1410 Gateway and is the answer not in the manual?

Emerson Wireless 1410 Gateway Specifications

General IconGeneral
BrandEmerson
ModelWireless 1410 Gateway
CategoryGateway
LanguageEnglish

Related product manuals