DJI M300/M350 preparation for Hovermap operation
Release date: 30 Apr 2024
Revision: 2.2
1.
2.
3.
2.1 Instructions
Bring together the following:
Samsung Galaxy Tablet case
Emesent Aluminum Mount (A0021)
Qty=6 M3 x 6 mm screws (provided)
A drill (Ø3mm and Ø10mm bits)
Print and follow the instructions in the Drill template for Galaxy Active Tab Pro to drill holes in the
correct location on the case.
Screw on the mount, as shown in the following images.
Note
The DJI M350 uses the DJI RC Plus controller and can run the Emesent
Commander app directly, eliminating the need to mount a third-party tablet on
the drone controller.
Refer to Emesent Commander App Installation manual for instructions.
To Next Page
Loading...
