3. If you want a library of database to be created, you need to set the ‘Media
Library’ to ‘On’.
4. However, the default setting is ‘Off’.
Please note: When ‘Media Library’ is set to ‘On’, the library or database will be created
during a restart. Creating the library or database can take a while, depending on the
amount of media files stored on your (USB) hard disk.
9.2 3D/2D video auto detect
The EM7480/EM7485 has the possibility to switch to a 3D mode if the media player
detects a 3D stream. To be able to switch to a 3D mode, the media player needs to be
connected to a 3D television using a HDMI High Speed (HDMI 1.4) cable.
1. Go to ‘Setup’ and press the ‘OK’ button on the remote control.
2. Go to ‘MISC’.
3. If you are using a 3D television, the 3D/2D video auto detect’ option is available.
4. Check whether ‘Default 3D’ is set. ‘On’ is the default setting.
9.3 Default subtitle language
This option makes sure the subtitle will be displayed in the pre-set language (if
available).
1. Go to ‘Setup’ and press the ‘OK’ button.
2. Go to ‘MISC’.
3. Select ‘Preferred Subtitle language’. This option is set to ‘Dutch’ by default.
9.4 BD menu
The EM7480/EM7485 is able to show Blu-Ray menu’s which have a Blu-Ray 1.0
profile.
1. Go to ‘Setup’ and press the ‘OK’ button.
2. Go to ‘System’.
3. Make sure the ‘BD-lite menu’ option is set to ‘On’ which is the default setting.
This way, the media player will ask you to play a Blu-Ray movie with or without
menu structure (If available).
To Next Page
Loading...
