Emmaljunga Viking - Carrycot Hood and Chassis Attachment

English
65
Viking v. 2.7
14
9
10
8
11
12
13
6
7
9
10
Attachment of the carrycot
• Engage the parking device: Lift the carrycot by the handles and
push the Easy Fix attachments into the receivers (14) on both
sides of the chassis until it locks into its position.
WARNING
• Make sure that the top part is in locked into position on both sides.
Attach the hood
• Attach the velcro to the exterior of the carrycot (11).
Adjust the hood
• Press both buttons (12) on the inside of the hood before adjusting
the hood (13).
IMPORTANT
• Never lift the carrycot when it is assembled onto the chassis.
Assembly and usage of carrycot
• Insert the mattress (9)
WARNING
• Do not place any additional mattresses in the carrycot. Only use the
original Emmaljunga mattress that is included with the product.
Removing the hood fabric
• Open the zipper (10) and remove the fabric.