Specifications
9970002204, REV E, 4/16/2012 © 2011 EMP 8
Identification
• The pump voltage (12V or 24V) is identified with the attached label.
The pump serial number is located on the label attached to the housing of the pump. (See below.)
Part Information Location
The label containing the part information is located on the outside surface of the pump.
Label Details
Figure 1: Part Label
Date Code
Serial Number
Country of Origin
Hardware Part
Number
Bar Code
EMP Programmed
Assembly Number or
Customer Part Number
Software Calibration
Number
Customer optional
information
LPE Rev A, 2-May-2013
To Next Page
Loading...
