EMP E2512A - Mounting Screws; Material Listing of Major External and Fluid Contacting Parts

Specifications
9970002204, REV E, 4/16/2012 © 2011 EMP 7
Mounting Screws
,; <,:&8
  =  -:&>/ "

Material Listing of Major External and Fluid Contacting Parts
Item Quantity Description Material Fluid Contact
1 1 Cover Cast Aluminum (413)
2 1 Housings Cast Aluminum (413) YES
3 10 Bolt 18 – 8 Stainless Steel
4 1 Volute Cast Aluminum (413) YES
5 1 Impeller (Internal) 304 Stainless Steel YES
6 1 Shaft 1020 Carbon Steel YES
7 1 Product Label M - 714
8 2 Connector Dupont Zytel Nylon 70G33L


7:6444%&'1
)3
Hose Clamps
When making the inlet and outlet hose connections to the pump it is strongly recommended to use
SAE20CT worm drive type hose clamps. Torque worm drive clamps to 70 +/-10 in lbs
. Spring type
clamps are not recommended.
LPE Rev A, 2-May-2013