Product Overview
The information contained in this manual is updated periodically. While great care is taken in compiling the information contained in this manual, Engineered
Machined Products, Inc. cannot assume liability for losses of any nature arising from any errors and/or omissions.
The information and specifications contained throughout this manual are up to date at the time of publication. Engineered Machined Products, Inc. reserves
the right to change the content of this manual at any time without notice.
© 2017 EMP, Inc. 2
Engineered Machined Products, Inc.
2701 North 30
th
Street
Escanaba, MI, USA 49829
Phone: +1 (906) 789-7497
www.emp-corp.com
Service@emp-corp.com
Product Overview
The WP29 and WP32 are electrically powered fluid pumps available in 12 volt DC and 24 volt DC configurations.
The pump is standard with carbon steel shafts. Proper installation of the pump will help ensure the performance
and reliability of the electric pump while reducing the risk of damage to other components in the system.
To Next Page
Loading...
Need help?
General
