EmpirBus Connect-50 User Manual

5/15 EmpirBus Connect-50 User manual Ver. 1.33
5.3!Power!feed!
The power is supplied on the two M6 bolts with positive on the left (marked with +) and negative on
the right (marked with -). The total max output is 50A.
No LED indicators and touch control on 2110000 & 2110001.
5.4!Connectors!
The bus connector is an NMEA2000 compatible male Micro-C 5 pin connector. It is not recommended
to connect a T-connector directly to the unit; a drop cable should be between the main bus and the
unit.
The consumers in and outputs are connected via connectors. Only use correct crimp and extractor
tools when assembling the connector. Unused pins in the connector should be plugged with circuit
plugs in order to maintain IP65.

EmpirBus Connect-50 Specifications

General

Brand	EmpirBus
Model	Connect-50
Category	Switch
Language	English