41
FAQ
Q1: There is no display when using composite AV OUT connection.
Composite AV OUT only supports NTSC/PAL system. You might select
NTSC/PAL
progressive scan, 720p, or 1080i resolution. Please press
RESOLUTION
key to change the resolution setting to
NTSC/PAL
system.
Q2: When a video is played on screen, but can not be recorded.
Some DVD video disc, with copy protection, can not be recorded.
Q3: No sound in component video connection
Component video only deliver video signal. You still need to connect the
red and white plug of composite AV extension cable to AV input on your TV or
monitor.
Q4: No display when the resolution is changed
Please check whether your display support the resolution or not. If you use
AV OUT
connection,
ME1
only support
NTSC
and
PAL
system.
Q5: ME1 can not detect a USB device
ME1
may not detect an USB device which consume too much current.
Please refer to the manual of your USB device to use external power to support
the USB device.
◎
Please visit www.emprex.com
for more products and support information.
To Next Page
Loading...
