EMSI FLEX-MT PLUS - TENS Stimulation Modes; Burst Mode Description; Normal Mode Description; Modulated Rate & Width (MRW) Mode

15
TENS Mode
MODE Interpretations
Burst
(B)
delivered per second. Positive pulse and negative pulse iterate continuously at fixed
100Hz. Pulse width are adjustable from 50~400µs
Normal
(N)
are not automatically interrupted nor varied in any way. In this mode, the pulse rate
mode is quite versatile because it may be applied with a variety of rate and width settings.
(from 2 to 150Hz) and pulse width (form 50 to 400μs) are fully adjustable. e normal
Modulated
Rate & Width
(MRW)
massage-like sensation. It’s believed that nerves can become accustomed to, or “ac-
commodated” to the same electrical stimulus after a period of time and thus would
produced to oer a variety of dierent electrical stimulation, thus preventing nerve
accommodation so that less intensity is required for long and eective treatment. In
this mode, during the beginning of 0 5 second period, the WIDTH decreased to
50% of its original setting and then during the next 0 5 second period, the RATE is