EMSI FLEX-MT PLUS - TENS Stimulation Modes Continued; Modulated Intensity & Pulse Width (SD) Mode; Bi-Pulse (Bi-Pulse) Mode

16
MODE Interpretations
Modulated
Intensity and
Pulse Width
(SD)
so that the intensity is always increasing while the pulse width is decreasing and
-
sity equal to setting). Total cycle time is 6 seconds. Pulse rate (from 2 to 150Hz)
and pulse width (from 50 to 400µs) are fully adjustable.
Bi-Pulse
(Bi-Pulse)
pulse rate of Channel 1 is fixed at 4Hz) while delivering 100 pulses per second
to Channel 2 (i.e. the pulse rate of Channel 2 is fixed at 100Hz). Stimulation
vertical line. Pulse width (from 50 to 400 µs) is fully adjustable.
9.0 | TENS Stimulation Mode Descriptions continued
TENS Mode