Enapter Electrolyser 4.0 - Page 33

VERSION
DOCUMENT TITLE
RELEASE DATE
00
EL 4.0 – Owner’s Manual
2022-09-12
EL – Owner’s Manual – Rev.00 – September 2022 28
EL4.0 all pipes connected
EL4.0 all pipes connected
After performing the first-time filling (filling the device with the supplied electrolyte solution), the
device will consume water during operation, at a rate of around 0.42 l/h. The refilling is triggered
automatically from the “H
2
O IN” port. This occurs periodically during operation, or directly after ramp
down.