Enapter Electrolyser 4.0 - Appendix V. Error Codes

VERSION
DOCUMENT TITLE
RELEASE DATE
00
EL 4.0 – Owner’s Manual
2022-09-12
EL – Owner’s Manual – Rev.00 – September 2022 54
Appendix V. Error Codes
Here you can find a list of all the errors that can be triggered while using the electrolyser. The list covers
all firmware versions.
Check, which firmware is installed on the device and then chose “Modbus TCP Communication
Interface” and then “Warning, Error and Fatal Error Codes” to access all warning and errors.
For the warnings and errors, which can appear while using the dryer, use this list.