Need help?Do you have a question about the Enapter EL and is the answer not in the manual?
General| Product Type | Electrolyser |
|---|---|
| Hydrogen Output | 0.5 Nm³/h |
| Operating Pressure | 35 bar |
| Technology | Anion Exchange Membrane (AEM) |
| Cooling | Air |
| Communication Interface | RS485 |
Operator awareness of device limitations and responsibilities for safe operation.
Guidelines for safe handling, lifting, and personal protective equipment.
Potential dangers of hydrogen, including explosion, ignition, and asphyxiation.
Risks associated with mechanical handling and electrical connections.
Risks associated with potassium hydroxide electrolyte, including first aid.
Guidance on applying safety practices and local regulations.
Instructions for connecting power supply and using the circuit breaker.
Steps for powering on, connecting to Enapter Cloud, and adding the device.
Procedure for filling the device with electrolyte solution before operation.
Enabling maintenance mode and setting the hydrogen production rate.
Overview of Enapter's cloud monitoring and mobile application features.
To Next Page
