EL – Owner’s Manual – Rev.00 – September 2021 34
Warning!
Remove the supply of power before cleaning the device. Never handle the
electrical connections with wet hands. Ensure the device is dry before
returning the supply of power to it.
Attention!
The internal components of the device do not need to be cleaned and must
not be accessed by the user for cleaning.
Only trained and authorised personnel is allowed to open and inspect the
device for maintenance reasons.
Enapter is fully committed to recycling the devices and its components.
Please return the device to Enapter at the end of life, where the device will
be fully recycled.
By ensuring this product is correctly recycled, you will help to further reduce
your impact on the environment and aid us in making the world cleaner and
greener.
Transport
For returns, please contact the Enapter customer support team to receive the Return Material
Authorization form and the packaging instructions.
Before transport, verify the electrolyte tank has been emptied according to Appendix III, and seal the
connections on the front panel of the device. To seal the connections, simply insert the red plugs that
were supplied with the device into their respective bulkheads and place the plastic caps on the
hydrogen outlet and purge. Ensure the device is transported in an upright position, and that an
indicator for this is clearly visible on the outside of the packaging.
Attention!
Enapter may not accept the device if returned without the original shipping
boxes or equivalent for safe transport. If damage occurs during the return of
a device under warranty, Enapter will not cover the costs of repair.
Warning!
Never lift a device alone, as it weighs over 50 kg. Use lifting aids if available.
Due to their weight and size, it is recommended to use a pallet cart or similar
devices to manoeuvre the box upon delivery.
If the box must be lifted somewhere, always lift with at least two persons.
Attention!
During winter, or when outside conditions are below freezing temperature,
the shipping box must be additionally marked with a label informing the
shipping agent that the package may not be exposed to temperatures below
1°C at any time.
To Next Page
Loading...
