EL – Owner’s Manual – Rev.00 – September 2021 3
SAFETY INSTRUCTIONS
Warnings and Hazards
The following terms and symbols are used in this manual to indicate important text passages which
must be given particular attention:
General safety
The operator must be aware of the following:
1. The device is not intended to be used in a potentially explosive area
2. Enapter is not responsible for improper use:
• Caused by wrong inputs
• Caused by wrong input pressures
• Caused by improper mounting or tubing (e.g. leaking gas connections)
• Caused by connecting the wrong power supply (e.g. wrong voltage)
• Caused by improper installation
3. Regarding design and installation, the operator must follow Enapter’s installation rules, and
ensure full compliance with local safety guidelines and regulations.
4. It is the operator’s responsibility to regularly check and maintain all outlet lines, as well as to
keep the lines free of ice or other obstructions.
5. It is the operator’s responsibility to regularly check and clean the air intakes and outlets of
the device, as well as to keep the air inlets/outlets free of obstructions.