EL – Owner’s Manual – Rev.00 – September 2021 6
LIST OF HAZARDS
The operator who operates, services, maintains, or installs this device must be aware of the potential
dangers associated with its use and set up, the required materials, as well as the inputs and outputs,
to implement sufficient countermeasures and processes to prevent accidents and act correctly in case
of emergencies.
Always ensure that the device is installed and operated in compliance with local code,
regulations, and standards. Do not install, operate, or maintain the device without explicit
knowledge or help from experienced and licensed system integrators, the manufacturer,
or external certifying bodies.
Hydrogen hazard
It is the operator’s responsibility to implement a safety system to manage the devices inputs and
outputs – more information about this is below.
Hydrogen can explode!
Hydrogen can leak, ignite, and burn!
Do not inhale hydrogen!
Hydrogen can cause asphyxiation!
Do not handle hydrogen without a suitable ventilation and safety system!
Incorporate the device, especially the hydrogen and the purge lines, into the
operational safety concept!
Avoid heat in the vicinity of the device.
Do not smoke and do have naked flames in the vicinity of the device.
Do not have hydrogen, not even in low concentrations in the vicinity of the
device.
Comply with local safety regulations.
Comply with regulations for the handling of compressed hydrogen cylinders.
In the case of escaping gas, stay away and keep inflammable materials away.
Prevent electrostatic charging of the device.
Ensure proper installation of the supply pipes.
Check the hydrogen lines and connectors regularly for leakages.
Mechanical Hazards
It is always necessary to wear appropriate Personal Protective Equipment (PPE) and to use suitable
tools when handling the device and packaging material.
A general training with regards to lifting heavy loads and general safety briefings are required to
perform the tasks described in this manual safely.
Operators must comply with the general safety principles during the handling phases. In particular:
Caution!
Before handling, moving, and commissioning the device – assess the hazards
of the operation and study the manual. Appropriate PPE must be worn, such
To Next Page
Loading...