EL – Owner’s Manual – Rev.00 – September 2022 48
Do not open the device!
During maintenance, avoid heat in the vicinity of the device and the hydrogen source.
No smoking, no naked flames.
Prevent electrostatic charging of the device.
Before starting to work on the device, ensure being aware of all relevant local health and
safety guidelines, rules, directives and regulations, as well as action plans if an accident
occurs.
7.3 CLEANING
When performing the routine maintenance processes and checks, the device should be inspected and
cleaned. Start by carefully using a vacuum cleaner (not included) to clean out the ventilation
openings/grills. Afterwards, use a damp cloth (no acids, aggressive or abrasive substances) to clean the
outside of the device.
Warning!
Remove the supply of power before cleaning the device. Never handle the electrical
connections with wet hands. Ensure the device is dry before returning the supply of
power to it.
Attention!
The internal components of the device do not need to be cleaned and must not be
accessed by the user for cleaning.
Only trained and authorised personnel is allowed to open and inspect the device for
maintenance reasons.
Enapter is fully committed to recycling the devices and its components.
Please return the device to Enapter at the end of life, where the device will be fully
recycled.
By ensuring this product is correctly recycled, you will help to further reduce your impact
on the environment and aid us in making the world cleaner and greener.
7.5 TRANSPORT
For returns within warranty, repairs or recycling, please report your device issue to the Enapter
customer support team to receive the Return Material Authorization form and the packaging
instructions.
To Next Page
Loading...
