ENCLO EC18010 - Step 5.3: Optional Hard Ground Installation

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18010
1
1
2 3
STEP 5.3
Optional in hard ground: If your ground is too hard, or you have more than 3 or 4
panels to install, please consider these options:
1. Use a 1¾” diameter auger bit (commonly used for planng tulips) as illustrated
($15-$20 on Amazon.com).
2. Drill a hole about 12” to 16” deep at the desired locaon, and ll the holes
with water as illustrated.
3. Push the panel posts into the holes.