ENHWI-3GN3 User’s Manual
www.encore-usa.com
23
The Smart Wizard will detect the DHCP and PPPoE connections automatically. In the picture
above it shows that the Smart Wizard detected a DHCP server. You can choose the detected
service type or select “Others” to setup the WAN settings manually. Otherwise click next to
accept the detected connection type. If you have not connected your router to the working DSL
or Cable Modem or 3G USB Modem mentioned in the earlier instructions there will be no WAN
connection type will be detected. If that is the case, you may connect the Ethernet cable again
from the DSL/Cable Modem or 3G USB Modem then click the “Rescan” button. If still having
problem, call your Internet Service Provider to check your subscription.
To Next Page
Loading...
Need help?
General
